AVerVision CP130 (Recommended replacement: CP135)

There is no picture on the presentation screen.

  1. Check all connections again as shown in the user manual.
  2. Verify the setting of the display output device; make sure it is set to the correct input channel.
  3. If you have a laptop connected to the document camera and cannot see your desktop on the presentation screen, please make sure to set your laptop to dual screen display mode.
  4. Check the TV/RGB switch on the left side of the camera and set it accordingly to the type of display device you have.

I have set up the Document Camera and checked all the connections as specified in the user manual but I cannot get a picture on the preferred presentation screen.

  1. The unit's power button turns orange in standby mode. Press the POWER button again to turn ON and the LED light will turn blue.
  2. The default camera display resolution setting is on 1024X768. If your output device does not support this resolution; no image can be projected. Simply press hold the MENU and < > button to increase or decrease the resolution setting.
  3. If your output device is a TV or any analog device, please switch the TV/RGB dip switch to TV.

The picture on the presentation screen is blurry.

  1. Reset your document camera to default by pressing Menu > Default > Yes > Enter. Finally power-cycle your camera.
  2. Check your output device's focus adjustment.
  3. If your Camera has Auto Focus, press the Auto focus button on your unit's control panel.
  4. If your Camera has Manual Focus, Adjust the focus ring located under the document camera's lens.

There is no computer signal on the presentation screen.

  1. Check all cable connections among the display device, Document Camera and your PC, replace cable(s) if necessary.
  2. Connect your PC to the Document Camera's RGB input first before you power on your computer.
  3. Make sure to switch your Laptop dual screen display mode.

There are distorted lines running across the presentation screen.

  1. Reset your camera's display mode, press Menu > Settings > Mode > High Frame > Enter. Then return to Menu, select Default > Yes. Finally power-cycle your camera.

The brightness on the presentation screen is dark and unreadable.

  1. Toggle the Auto image button on your unit's control panel
  2. Reset your units display by pressing Menu, select Mode > Text. Return to Menu and select Default > Yes. Finally power-cycle your camera.
  3. Make sure there are sufficient lighting in the room or Turn on the LED lamp on your document camera head
  4. If you are in a dark environment, turn on "Night View" in your document camera's menu.
  5. Manually adjusts the Brightness and Contrast levels in the Camera's Menu.
  6. Check your projector's bulb, it may need to be changed.

The AVerVision Software cannot detect the document camera.

  1. Make sure your USB cable is connected
  2. Make sure the USB cable or USB port is not defective
  3. Check your Device Manager, If Digital presenter driver shows damaged, right click and select "Update Driver".
  4. Make sure you have the most currently updated software, download list is found under Download tab.

For more AVerVision CP130 Q&A please visit this page.

Please note that this product has been discontinued. The recommended replacement is the AVerVision CP135.

Last updated on 10/11/2010AVerVision CP130 User Manual

A+ Interactive Software (Old version)

Downloads for: Windows | Mac
A+ Interactive Software 1.7 Software (v.1.7.1.6) - Mac
A+ Interactive Software Quick Reference Guide - Mac
A+ Interactive Software Uninstaller - Mac (Download and run this software to uninstall older A+ software before installing a new version)

AVerVision Software

AVerVision 3 Software Quick Reference Guide - Windows
AVerVision Software (Version 3.5.1.0002) Win2K sp4, WinXP, Vista 32
AVerVision 2 Software Quick Reference Guide - Mac
AVerVision Software (v.2.8.2.0001) - Mac 10.5 Leopard, 10.4 Tiger, 10.3 Panther
  • Go to VC support
    For video conferencing support,
    please click here.
Contact Support
Toll free:
1.877.528.7824
Live Chat From Customers

"What you can do with TabCam and the app leads right into the way testing is going to be for new Common Core Standards. I love the ability to annotate and edit, as it's so authentic for the kids to be able to put their own work up and see what corrections are needed, where they need to add, and to interact with it as a whole." — Kathy Schlief, Teacher, Campbell, CA

"It has been a wonderful experience working with AVer solutions. I presented our sales rep, Mike Hiller, with our situation and he was quick to respond with a solution. I found AVer's tech support to be very insightful and was always just a phone call away..." — J. Todd Chicchirichi, Technology Resource Faciliator, Head Technologist, Jefferson County Schools

"AVer provided us with a great turn-key solution to our VC needs. We wanted 'quality' and 'ease of use'. We received both with our AVer HVC 310 VC system. Customer support was above expectations. They answered questions directly, and provided all the follow up we needed. Great company!" — Chris Oar Owner, Outback Media

More Information