Thank you for choosing AVer video conferencing solutions.
This hardware installation guide serves as a reference for making the connections needed to get your new system up and running as quickly as possible.
Before making the connections, make sure all devices are powered off. Refer to the illustrated connections below and also to the user manual of the device you are connecting to the AVer EVC-Series system.
* Make sure all connections have been connected successfully before powering on the system.
Locate the VGA/HDMI input port of the graphics display device and connect it to VGA OUT/HDMI OUT port of the AVer EVC with the supplied VGA/HDMI cable. You can configure the VGA OUT and HDMI OUT ports at the same time upon a dual screen configuration.
Locate the port on the back of the camera and connect it to the CAMERA IN port of the EVC with the supplied camera cable.
Use the supplied MIC cable and connect the red tag connector to the MIC IN port of the EVC. Then connect the other end of the MIC cable with the blue tag to MIC OUT port.
* Press the button on the top of AVer EVC-MIC to mute/un-mute the MIC.
Connect the LAN port of AVer EVC to a RJ-45 wall jack or Ethernet hub with the supplied RJ-45 cable.
* It is requires an IP-based network before beginning LAN connection.
Connect the power adapter to a standard 100V~240V AC power outlet with the supplied power adapter and power cord.
Locate the VGA output port of the Laptop or Desktop and connect it to VGA IN port of EVC with the supplied VGA cable for an image display.
* To share the video signal from the computer, press PRESENT and select "VGA".
Locate the AUDIO output port of the Laptop or Desktop and connect it to AUDIO IN port of AVer EVC with the supplied 3.5mm Audio cable.
Locate the AUDIO in port of the LCD TV speaker or normal speaker and connect them to AUDIO OUT port of AVer EVC with a RCA cable.
EVC main system supports two USB2.0 interface for saving data. One is located on the front panel of main system; another is located on the back panel.